Oil & Fuel Massey Ferguson 1010 Fuel Line?

[gerry100]

Started my 1010 after about 2 months and noticed a pinhole leak in the fuel line just before it goes into the rear most cyclinder.

This line is at least 25 years old and looks like a simple hose with three junctions where it turns into each of the three cylinders.

Any tips on finding this part?

Thanks

 

[Peter 315]

Is it just the rubber fuel return line ? Take a piece to the parts store and match it up......

 

[gerry100]

Is it just the rubber fuel return line ? Take a piece to the parts store and match it up......

Its the rubber line from the fuel tank to the 3 cylinders, looks like a simple hose with a few tees.

Your suggesting I take it out and make a duplicate with stuff from NAPA?

Sounds cheap and appears doable even by a hack with Murphy living in his garage.

Thanks.

I was hoping for a complete assembly for a 30 yr old tractor--- hah

 

[Peter 315]

Its the rubber line from the fuel tank to the 3 cylinders, looks like a simple hose with a few tees.

Your suggesting I take it out and make a duplicate with stuff from NAPA?

Sounds cheap and appears doable even by a hack with Murphy living in his garage.

Thanks.

I was hoping for a complete assembly for a 30 yr old tractor--- hah

Yes just get a guesstimate on the length they sell it by the foot get fuel rated hose , Maybe some clamps.......

 

[Roadworthy]

That is not going from the tank to the injectors. It's a return from the injectors to the tank. There is virtually no pressure on it. Mine is some kind of cheap neoprene line and the T fittings were plastic like for windshield wiper line or drip irrigation fittings.

 

[MF RED in MT]

Here's a link to the MF Parts Book site, MF 1010 tractor, Fuel System:

Maybe this will help you out, KC

Login