Hi Guys, I'm new to the group and i have a problem,, I have a Massey Ferguson 1250 compact tractor with a 1246 factory installed loader,, it has the infamous Nimco 2s-40272 control valve. i purchased a Summit rear remote kit and i am trying to hook it up.. it would be real easy if I could find the power beyond or HPCO plug, but that is turning out to be almost impossible,, so here is my question.. can i install a manifold block in the pressure line going to the loader and tap off that to the rear remotes?? Or is there any other way of getting pressure back to the remotes? Any advise would be greatly appreciated,, I,m not opposed to buying a new FEL valve, but mine has worked fine for 20 odd years and i really don't want to change if it's not necessary...
Massey Ferguson 1250 power beyond
- Thread starter toolguy33
- Start date
- Views: 2645
-
- Tags
- massey ferguson 1250
Harry in Ky
Veteran Member
Check your PM inbox.
WranglerX
Super Member
Find the line going back to 3PH and follow it forward to Nimco valve, really good chance its in PB port of FEL valve ... Also it might be easier to connect in at 3PH connection than at FEL valve...