WVaHillbilly
Bronze Member
- Joined
- Sep 22, 2004
- Messages
- 68
A friend of mine recently worked on his Massey Ferguson 205-4,he had to put a new head on it the old head had cracked and was leaking coolant into the engine and he has set the valves at 12000 th,this is a 2 cyclinder diesel Massey 1985 model and he cannot get it to fire. He has fuel right down to the pistons etc. Any idea why it will not fire,he feels certain he has the timing set and the valves are reseated. I am just asking on his behalf,any suggestions or thoughts would be appreciated.
Thank you .
Thank you .
