R F
New member
There I was...thought I had winter licked. Picked up a blower, blade and had a dependable gas tractor to get me through. I was moving implements around the yard and things seemed OK..until I was hooking up the blade and the 3 point hitch stopped working....then I tried the loader and bucket...nothing.
I'd already moved a few things around and from one minute to the next the hydraulics stopped. Usually I can hear something goin on inside the compartment under the seat under where the hydraulic levers are attached but now there is no sound when levers are engaged.
There is no movement at all when I engage the levers.
PTO spindle engages fine and fluid level is fine.
If anyone out there has any advice on how to get started troubleshooting my problem your wisdom would be greatly appreciated. Please advise on what my first move to diagnose and possibly solve this problem is.
Thanks very much.
Ryan
I'd already moved a few things around and from one minute to the next the hydraulics stopped. Usually I can hear something goin on inside the compartment under the seat under where the hydraulic levers are attached but now there is no sound when levers are engaged.
There is no movement at all when I engage the levers.
PTO spindle engages fine and fluid level is fine.
If anyone out there has any advice on how to get started troubleshooting my problem your wisdom would be greatly appreciated. Please advise on what my first move to diagnose and possibly solve this problem is.
Thanks very much.
Ryan
