Max26XL ETR solennoid fuse multiple failures

   / Max26XL ETR solennoid fuse multiple failures #1  

vietvetharry

Silver Member
Joined
Dec 18, 2006
Messages
103
Location
Upstate SC
Tractor
Mahindra Max26XL Shuttle, Montana C4864
I noticed a number of threads discussing the ETR fuse blowing causing the starter not to start. Has anyone found why that was happening? Did it have anything to do with the seat safety wiring shorting? Has anyone disabled the seat safety wiring?
 
   / Max26XL ETR solennoid fuse multiple failures #2  
yes most probably the seat safety switch... ETR solenoid fuse will blow
 
   / Max26XL ETR solennoid fuse multiple failures #3  
I've run into this issue several times. Always found improper routing of the seat switch pigtail causing the wire to get pinched. You may have to get under seat deck and cut the ties on the main harness to give you enough slack on the pigtail for good routing. :thumbsup:
 
   / Max26XL ETR solennoid fuse multiple failures #4  
^:thumbsup:
 

Tractor & Equipment Auctions

2013 Nissan Juke SUV (A50324)
2013 Nissan Juke...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
New Wolverine Skid Steer Hydraulic Breaker (A53002)
New Wolverine Skid...
2018 DandA 220V Hydraulic Breaker Excavator Attachment (A51691)
2018 DandA 220V...
2011 Ford Edge SEL SUV (A50324)
2011 Ford Edge SEL...
2004 Honda Pilot SUV (A50324)
2004 Honda Pilot...
 
Top