proadesign
New member
hello ....
our MF 130 had been standing around unused over the cold european winter period > and after it didnt start anymore >
we checked > and primed the thing anew > but there seems to be very little fuel being pumped out at the high pressure end !
it depends on the trottle setting alright > but is missing high pressure an volume ..... comming out of the losend pipe fitting at the injectors !
now .... what would be the most likely cause of this ?
the transfer pump ?
the valve at the end plate ?
or what do you think ?
our MF 130 had been standing around unused over the cold european winter period > and after it didnt start anymore >
we checked > and primed the thing anew > but there seems to be very little fuel being pumped out at the high pressure end !
it depends on the trottle setting alright > but is missing high pressure an volume ..... comming out of the losend pipe fitting at the injectors !
now .... what would be the most likely cause of this ?
the transfer pump ?
the valve at the end plate ?
or what do you think ?
