MF 1400 rear axles??

   / MF 1400 rear axles?? #1  

WilliamBos

Super Member
Joined
May 1, 2004
Messages
5,267
Location
Innisfil, Ontario, Canada
Tractor
MF 1635 12x12 Powershuttle
Hi,

I was looking through this site, and I might have been mistaken by the quality of the pics, but do the 1433/1440 and 1455 have the same rear axles? Just curious, I am looking to buy around this time next year. I am looking at a 1433 or 1440. It will get used for pulling our manure spreader ( an MF 160 bushel) while our MF 35 will be the one doing the loading. It will also be used for loader work, will it lift square ( 8 foot around 800 pounds or approx.) and round bales. The 35 has a loader also, but I would like the compact to be able to do this too.

Thanks

Will
 
   / MF 1400 rear axles?? #2  
Hello Will,
I don't have the books on a 1455, but a don't believe they have the same rear axle. The 1455 is a larger class tractor. As far as moving round bales, I use my MF 1440 to to move 4x4 and 4x5s, one at each end. Of course if the ground is very sideline, then it would be a problem.
 
   / MF 1400 rear axles??
  • Thread Starter
#3  
Hi Jerry,

Sideline? Thanks for the info!! How does it handle the bales? No effort at all? And how does the loader lift? I am sure it would be good and strong for me. When I saw the pic, it looks like the rear axle in my dads MF 35, only his is bigger I think!!

How is the ractor treating you? Which transmission do you have? Sync or powershuttle?

Thanks

Will
 
   / MF 1400 rear axles?? #4  
<font color="blue">Sideline? </font> Going across a slope.
I really like it and have had no problems, but I only have about 120 hours on it.
I have a power-shuttle.
 
   / MF 1400 rear axles??
  • Thread Starter
#5  
Oh ok,


Thanks Jerry. I am looking at ither at 1433 or a 1440. I thing I will go for the 1440 with the turbo for the extra HP, a FEL and a MMM!!! What do yu have with yours?

Will
 
   / MF 1400 rear axles?? #6  
Look at my Bio. That is just part of my attachments. The Turbo is nice, but I let it cool for a minute or so, before shutting down. I am always afraid of bearing coking. /forums/images/graemlins/crazy.gif But the turbo is worth the small concession.
 
   / MF 1400 rear axles??
  • Thread Starter
#7  
Hi Jerry,

Thanks for the info. Yes, letting it cool down for a minute never hutrs eh? And letting it warm up is the same!!

Thanks,

Will
 

Tractor & Equipment Auctions

Toyota 6FGU25 Forklift  5,000 lb Capacity (A51039)
Toyota 6FGU25...
2014 Ford F-150 Pickup Truck, VIN # 1FTFX1CT2EFB75727 (A48836)
2014 Ford F-150...
2001 DITCH WITCH 8020 RIDE ON TRENCHER (A51242)
2001 DITCH WITCH...
2014 INTERNATIONAL 7400 SBA 42 LUBE TRUCK (A51406)
2014 INTERNATIONAL...
2006 INTERNATIONAL 7600 T/A DUMP TRUCK (A51406)
2006 INTERNATIONAL...
2017-2022 Ford F-250/350 Rear Bumper (A49461)
2017-2022 Ford...
 
Top