MF 165 4WD

   / MF 165 4WD #1  

Rors

New member
Joined
Jul 7, 2010
Messages
3
Tractor
MF135
Hi There
Can any one help.
I have a mf 165 round axle with a core spline shaft.
I want to make it in to a 4wd but in order to use a 4wd kit i would need to change the main shafts from core spline shaft to a fine spline shaft, if i lets say bout a gearbox off a mf 165 with square axle this would have a fine spline shaft witch would work .
But i would need to change the back end as well Is there any way of changing these shafts, in to a fine spline with out changing the hole back end in other words is it posable to just change the shafts to fine spline?
And is it posable to have fine spline at one end and core spline at the other?
Thanks For Any Help
Rors:)
 

Tractor & Equipment Auctions

JOHN DEERE 560M LOT NUMBER 15 (A53084)
JOHN DEERE 560M...
2008 Chevrolet Express 2500 Passenger Van (A51692)
2008 Chevrolet...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2004 Mack CV713 Granite Fuel and Lube Truck (A51692)
2004 Mack CV713...
2003 INTERNATIONAL 9900I TANDEM AXLE SLEEPER (A53426)
2003 INTERNATIONAL...
2017 Mack CHU613 Day Cab Truck Tractor (A53117)
2017 Mack CHU613...
 
Top