keljan11
Bronze Member
Hi all,
Have an older MF 265 with cab (ROPS) that has a door issue. Due to a day the PO drove into an unseen hole in the field, (highways cleared out a culvert entrance that had 'filled in', the door sprung open I guess. Ever since, the door never closed properly again. When I got it, I could slam it shut, but lately I can't even do that to close it.
Looking at it, the door hangs lower at the front, (hinges from the back). I've loosened all the supporting bolts and tried pushing it up with a piece of wood, but nothing changes. Also where the door hinge slider is, the track is wowed wider a bit.
Any suggestions out there, short of just taking it off? (It does reach -20/30C during the winter, and the heater works great)
Have an older MF 265 with cab (ROPS) that has a door issue. Due to a day the PO drove into an unseen hole in the field, (highways cleared out a culvert entrance that had 'filled in', the door sprung open I guess. Ever since, the door never closed properly again. When I got it, I could slam it shut, but lately I can't even do that to close it.
Looking at it, the door hangs lower at the front, (hinges from the back). I've loosened all the supporting bolts and tried pushing it up with a piece of wood, but nothing changes. Also where the door hinge slider is, the track is wowed wider a bit.
Any suggestions out there, short of just taking it off? (It does reach -20/30C during the winter, and the heater works great)