goatdoc
New member
I have had the ST2640 for 20 years or so. I acquired a front end blade at an auction and attached it to the front end of the tractor. I found a source of live hydraulic pressure at a port just adjacent to the gear shift lever and created a return line to the hole that previously had the dipstick. I know this is the utmost jimmy rigged system but it seems to work but I would like to see some images of the proper way to hook up the hydraulics. Incidentally while pushing some asphalt grindings on a farm road the hydraulic fluid started spraying out of the gear shift lever boot. (Never had that happen before. The fluid was milky but it always turns that way after sitting awhile. Anyone have the "factory" setup? Thanks
