Mitsubishi ???

[Deaf]

Hello,

Looking at a used Allied 2504. They claim its a Mitsubishi tractor. Could not find anything on the unit that stated this. Other markings are- Koyker 110, Lennox ND. Its a 4x4, 3cy dsl, 20 HP Injector pump number C2D-9547. Does any one know anything about these tractors (good/bad)? Looks like a well made tractor. Everything on it is in english, turn signals, horn, ROPS, lights. So it looks like it was made for the US market. Tires are AG type. Very stout looking tractor. The loader from Lennox looks like it was design well for this tractor.

Thanks for the help

 

[Deaf]

Hi,

Found out some more info. Allied is an import CO. They claim these units are new and they do sell used. All types and models. Met them today and they left me with a good feelingt. The Allied model is based on a MTE1800d or a 1601. Are these models one of the better gray market units? Parts ect.......,

They also have Yanmar might look into them.

Thanks

 

[jimstractors]

I have sold 3 or 4 Mits units . Parts are not that easy to come by. You might want to stick with Yanmar. They have the best parts support that I have found.

 

[Tractors4u]

I did a search for Allied 2504. If what I have found is correct you my friend have been lied to. Not only is this not a Mitsubishi tractor. it is not even Japanese. When I did a search for Allied 2504, the only link that came up was a website called Farm Photo. You can post pictures of tractors there. There was a whole page of Allied tractors. They are various makes of Chinese tractors. Attached is a picture of the Allied 2504. Looks like a piece of junk.

The Koyker loader would be the best part of the tractor. I have had a few of their loaders and I have one of their backhoes now. They build pretty good stuff.

 

[Deaf]

Thanks for the feed back. I went to look at a used one on Tuesday, looked at one at the Allied CO here in Ohio and they showed me another unit that was used (same tractor) with KUMIAI MTE1800D on the hood. Was a dead match to the 2504 so I belive the are one and the same but I have been wrong before. The picture in your post looks nothing like the one I looked at. I will try to get a picture of the one I saw used and post it.

Thanks for your help

 

[YanmarFever]

Deaf,
Did you get any pictures of them ?

 

[YanmarFever]

Deaf
Were they putting the Kumiai stickers on the chinese tractors?
Thats hard to comprehend.
This is important to me if they were doing that.
Ernie

 

[Durbob]

Here is their website. Their small tractor looks like something they made and the bigger ones are Chinese. I think they might be Benyes. Their website is horrible. It doesn't look good with any of my browsers. I have thought about stopping in there sometime as i drive a truck and sometimes get within 5-10 miles of the place. I just sent them an E-mail asking what brand of motor is on the 2504 and what is the price of it.

http://www.tractor1.com/Index.htm

 

[alvanko]

I am not far from this company . Have actually e-mailed them for info on parts and implement sales and did not get a return e-mail. Have driven by a few times but the gate is always closed and locked. Maybe my timing is off.
I am pretty sure they were a distributor for "grey" tractors for a while and wanted to stop and kick the tires.
Only about 15 minutes away from me . Don't know what their hours of buisness are but I would have thought they would be open on Saturday morning. I have never seen this brand tractor before. I would like to know a little more about this company for future "grey" and implement parts support .

 

[Tractors4u]

Ernie,

I think the dealer may be doing just the opposite. He is putting Chinese decals on Japanese tractors. DEAF posted that the tractor picture I posted looked nothing like the tractor he looked at. It could be that this guy had some Allied 2504 decals and decided to spruce this Mitsubishi up a little.