mmm bent shaft on GC2300

[trimix1]

Hi guys - I noticed a big vibration while mowing today. I have found that the middle vertical shaft (the one under the right angel drive) is bent!!

I have pulled the gearbox apart and got the shaft out. Put in in a lath and checked it with a dial indicator. 3.5mm bend - BUGGER I dont remember hitting anything but it might have been a big log who knows.

Anyway does anybody know what the model number and brand of the gearbox is??
and if I can get parts ?? or do I have to buy a complete new gearbox??

Thanks for your advice list.

REgards,

Steve

 

[JerryG]

If you have a press try to straighten it. You don't have anything to lose.

 

[scott_vt]

If you have a press try to straighten it. You don't have anything to lose.

Mornin Trimix,
I agree with Jerry, I would try straightening the shaft. That is a pretty good bend, about .137 in my language, but with a couple of V-blocks and an arbor press along with your lathe and indicator you could get is close to new with some patience ! Good Luck !