3-Point Hitch Moldboard Plow for Mahindra MAX 25

[Rumleyus]

I used this forum quite a bit when researching my purchase but this is my first post. I wanted to know if any MAX owners use a 3 point moldboard plow. I grew up on a 350 acre dairy farm but now I live on 2.25 acres with a large garden. Having a small tractor is really different compared to what I'm used to back home.

I'm wanting to turn over and bury cover crops and other organic material/debris. I have a 3 point tiller which works very well but I don't like the green stuff wrapping up on the tines.

Just checking to see if anyone has experience with plows for this tractor, what size, what brand, etc.

 

[drajj5]

I used one last year with the Mahindra 28. It was used with my old 8n, the Mahindra pulled it fine. Not sure at what size it is but it looks rather large in comparison with the tractor. here are some pic's to give you an idea.





I will note that this tool would lay over so much material, my tractor would bottom out with one tire in the newly formed ditch. The 8n never bottomed out due to it's larger wheels/tires. The low center of gravity is an asset on my Mahindra for all other work, but when plowing - expect the underside to get dirty.

Maybe a little smaller plow would be good for you because your tractor sits closer to the ground, "a good thing".

 

[EverythingAttachments]

We make our ETA 12" Compact Tractor Plow for tractors just like yours.
Here is a video of one in use(we paint them CAT yellow now)
Travis