My BX2200 is dirtier than yours (SEE PICS)

[woodstock]

Well I have just over 7.5 hours and I'v cut 3 acres of grass. Removed two large bumps( about 6yds each) in an otherwise nice flat lawn, Used the bump fill to start a new driveway approach, Dug up two lilac bushes and moved and replanted them and got stuck trying to groom my 900 feet of river bank (still too wet yet) needed to winch it out All in one day. I think it needs a well deserved wash n wax.

 

[b8200hst4wd]

Re: My BX2200 is dirtier than yours

I've goten my B8200 in 2 1/2 feet of wet/Powder/ice/snow and keep going with a trailer too. I have turf tires too. Front wheels were packed with snow

Alex (B8200/HST/4WD/FEL/MidM/Tiller

 

[Alan L.]

What? Thats what my tractor looks like right after I wash it.

Alan L., TX

 

[skent]

Hey Woodstock, Just wondered, whacha running for ballast? Didn't see anything on the back. Are the rears filled?

Steve

 

[b8200hst4wd]

By looking at the bx it's tiny 1/2 the size of My B8200


Alex (B8200/HST/4WD/FEL/MidM/Tiller

 

[Charliebrn]

Dude, I hate to burst your bubble, but that dirty bota ain't that dirty... I've had it so bad you couldn't see orange....

Very nice setup, though, identical to mine. Just how did you pull out the bushes? I have to pull out some myslelf and haven't figgered out how to get ahold of em... Trees are easy, with the log chain, but the chain doesn't have anything to grip to....

Have fun tractorin!!! It's a GREAT little tractor...I've got about 70 hours on mine now...

 

[GlueGuy]

I agree with Alan L. My B7500 looks worse than that _after_ her bath than that.... /w3tcompact/icons/wink.gif

The GlueGuy

 

[gordon]

Man you sure had a busy first day! The first few hours on mine I just putted around getting used to the controls. Didn't even get it muddy the first couple of days. But have made up for it since.

Have fun, that's what counts.

Something tells me that your going to get it alot muddier than that with that much riverbank./w3tcompact/icons/smile.gif

Gordon

 

[woodstock]

You guys were right that wasn't dirty. You should see it not. Pictures to come tomorrow, I too pooped to do that right now.
Day 2 now up to 9.9 hours spent it on the river trying to find our 4X8 concrete platform for our irrigation pump. Man I must of moved 20 yards of river silt to find it and made a nice fishing pier in the process. Any other tractor, larger, would have been upside down in the river, not the BX. It got stuck twice but I was able to use the bucket to just get me out. Need to get that winch and those big mother bad -ss grip tires hope there in soon. Any ways I will post some pictures of the construction site and that dirty mother of a BX tomorrow.

Sweet dreams boys

<P ID="edit"><FONT SIZE=-1>Edited by woodstock on 06/22/01 11:14 PM (server time).</FONT></P>

 

[woodstock]

BX2200 River Dig Picture

Well here are the pictures after 2.25 hours. I knew that concrete and irrigation pipe was there somewhere. This is for a 10 HP electric water pump for me and five neighbours. I can put a rainbow up over my yard running 14 oscilating sprinklers at a time.
This is on the Assiniboine River just west of Winnipeg which is just north of the ND- Mn border in Canada.
PS
The red head is the foreman and the Blond handles payroll.