My new mod

   / My new mod #1  

coupman35

Gold Member
Joined
Mar 20, 2018
Messages
270
Location
Northen Ontario
Tractor
Now a L4060 had B2650
After seeing this on you tube i just had to d one also. I used 1/8 steel for the plate and 1/4 x3 in flat bar it work out pretty good and i thing it look good you don t see the hydraulic hose quick connect any more .
 

Attachments

  • 001.JPG
    001.JPG
    1.9 MB · Views: 203
  • 002.JPG
    002.JPG
    2.2 MB · Views: 206
  • 003.JPG
    003.JPG
    2.6 MB · Views: 223
  • 006.JPG
    006.JPG
    2.7 MB · Views: 205
  • 007.JPG
    007.JPG
    2.6 MB · Views: 218
   / My new mod #2  
After seeing this on you tube i just had to d one also. I used 1/8 steel for the plate and 1/4 x3 in flat bar it work out pretty good and i thing it look good you don t see the hydraulic hose quick connect any more .
Is that a Paul Short step?
I have his single.
 
   / My new mod
  • Thread Starter
#3  
I did it my self saw that on a tractor on you tube it better then the one that comes whit the tractor .
 

Tractor & Equipment Auctions

2013 INTERNATIONAL 4300 26 FT BOX TRUCK (A51222)
2013 INTERNATIONAL...
3in Poly Pipe (A49461)
3in Poly Pipe (A49461)
80in HD Tooth Bucket with Side Cutters ONE PER LOT (A51039)
80in HD Tooth...
2022 RAM 2500 (A50854)
2022 RAM 2500 (A50854)
2014 CATERPILLAR CT660S SBA 6X4 DUMP TRUCK (A51406)
2014 CATERPILLAR...
CFG MH12RX Mini Excavator (A49461)
CFG MH12RX Mini...
 
Top