my parking brake spring went missing 395 farm pro

[newhorizons]

Is this a dealer item or can I get one @ the local parts store..? Also anybody have an idea on trailing these? specifically tie down points and which chains/straps do you use>? thyanks Kevin.its actually a fram pro 2430 4 wheel drive with a Koyker 160 FEL. thanks again..

 

[BTDT]

Tractor supply has a good assortment of springs. I would try them. Not sure about your specific tie down points, but TSC also sells binders, chains, and straps. Welcome to TBN.

 

[TSMART]

My Jinma 224 has the upgraded seat, it uses mainly 2 big springs, each has a hook on both ends.....one spring has a broken hook..so i have lost 50% which is a lot cause I am 200 lbs + I bottom out all the time (ouch) . you think TSC might have that one?

 

[BTDT]

My Jinma 224 has the upgraded seat, it uses mainly 2 big springs, each has a hook on both ends.....one spring has a broken hook..so i have lost 50% which is a lot cause I am 200 lbs + I bottom out all the time (ouch) . you think TSC might have that one?

Probably, but how about a pic of the one you have left. If TSC doesn't have it McMaster-Carr probably will. Good luck with your search and welcome to TBN

 

[Affordable]

I may have one of the spring seat springs,we had one break another time and the factory sent us a seat that we took 1-spring out of.You can call Jerry at the shop to see if we still have one left 979-865-4002

Tommy
Affordable Tractor Sales

 

[hill]

As to your trailering question, I used 3/8" chain front and back with chainbinders for tension on my little 12' tiltbed trailer. Wrapped around the rear axle/ROPS joints and around the front axle itself. It rode about 175 miles as nice as could be.

If there'd been a loader on the tractor I probably would have backed onto the trailer.

http://i130.photobucket.com/albums/p263/twagger/Jinma1.jpg

http://i130.photobucket.com/albums/p263/twagger/Jinma.jpg