My tooth bar for the L3130 arrived yesterday.

[Gary_Sharbonno]

I like the idea of having an edge on the back side of the bucket. Does anyone have any pictures of one welded in place? Want to make sure that I don't weld mine in the wrong place or angle. Thanks for the idea.
Gary

 

[Freds]

I know I didn't take any pics of mine specificaly and I don't have that tractor anymore, but you would have to see where it would work on your particular bucket.
On by Bota there is the edge/toothbar and the part of the bucket that sits flat on the ground when the bucket is level. Then there is a shorter flat side that angles up at about a 45 degree... that is where I had mine welded, but you need to position it on that flat side like I mentioned above. You don't want the angle to contact the ground until you curl the bucket back.
I'm going to weld one on my L3130 as soon as I get around to picking up another angle.