I've been looking at a nice Bolens Iseki G154 and it lacks all 3 pt hitch components. Where would I start looking for these parts? The tractor is fitted with a front mount snow blade with the necessary hydraulics and perhaps this is why there is no 3 pt hitch hardware in the back.
need 3 pt hitch elements
- Thread starter msjanket
- Start date
- Views: 1344
rambler
Veteran Member
- Joined
- Jul 6, 2003
- Messages
- 1,994
- Location
- MN
- Tractor
- Ford 960, 7700, TW20, 1720; IHC H, 300; Ollie S77
Does it have the lever & the rocker arms to lift the 3pt, it's just missing the 2 arms and the vertical arms?
If it has _nothing_ at all then run awa, you can't afford to put in the whole internal mechanism and lift and rocker shaft and all....
If just the 2 vertical and 2 horizontal arms - you can check junk places and aftermarket places to come up with something.
--->Paul
If it has _nothing_ at all then run awa, you can't afford to put in the whole internal mechanism and lift and rocker shaft and all....
If just the 2 vertical and 2 horizontal arms - you can check junk places and aftermarket places to come up with something.
--->Paul
BillS2009
Bronze Member
- Joined
- Oct 6, 2009
- Messages
- 99
- Tractor
- iseki TS1610
I'm going to guess it's uses Cat.2 components. You can get them at Tractor Supply.
catskinner
Silver Member
I've been looking for parts for my g152, seat and sway chains.
Good questions but I have the feeling there is no guts inside the chassis that activates the external hardware. There is nothing on this tractor connected with the 3 pt hitch. I'd wager that costs would be rather brutish to try and complete this part of the tractor, too. I'm just wondering how this set of circumstances ever originated in the first place.
I don't think there's a better tractor than the Bolens Iseki's. Just as good as, but not better. What tractor has heavier axles? Prices out this way are bloated and rising all the time. Sorry kettle of fish.
I don't think there's a better tractor than the Bolens Iseki's. Just as good as, but not better. What tractor has heavier axles? Prices out this way are bloated and rising all the time. Sorry kettle of fish.
NHmitch
Platinum Member
I have a G154, and it has great hydraulics on the back, but I am not sure if that one is missing the hydraulic components. I have been able to find the 3 point lift arm assemblies, but if I did not have this tractor, and I was going to invest in one, i have been looking at the remanufactured Yanmars. They are a great tractor as well. I found them at Used tractors for sale, used Yanmar tractors, reconditioned Yanmar tractor, Gray Market. I would definitely not part with my G154, its a great tractor!
Andrew
Andrew
NHmitch
Platinum Member
Leonard,
Sorry, I did not see your post about being able to supply the parts, thats great that you carry them, I may have to call you too because I need new lift arms for my G154.
Sorry, I did not see your post about being able to supply the parts, thats great that you carry them, I may have to call you too because I need new lift arms for my G154.
