Need a few parts for disk no nonger mfg. ??

pharmvet · Jan 26, 2011

Against the advice of some folks who obviously had been down this road before, I purchased a disk made by a company no longer in business. Its a very good heavy duty disk (Poplarville Mfg. Co.) Its 10' wide and is 3 pt. attach. I need 2 spacers for it. Each bearing has a short spacer on one side and a long spacer on the other. I need 2 of the long spacers.

1) Where do I begin my search?

2) What measurements will I need in order to try to match these spacers?

Any point in the right direction is very welcomed. thanks

countrybumpkin · Jan 26, 2011

Shouldn't be to hard to come up with something that will work. I'm sure he will chime in soon but if not you can contact Ken Sweet he should be able to help.

Sweet Farm Equipment Co.,Disc Mowers, Compact Tractors,Implements, Ship Nationwide Daily

bjr · Jan 26, 2011

Measure things up and go online to Agri-Supply you should be able to find some "Will Fit" spacers. bjr

sweettractors · Jan 26, 2011

pharmvet said:
Against the advice of some folks who obviously had been down this road before, I purchased a disk made by a company no longer in business. Its a very good heavy duty disk (Poplarville Mfg. Co.) Its 10' wide and is 3 pt. attach. I need 2 spacers for it. Each bearing has a short spacer on one side and a long spacer on the other. I need 2 of the long spacers.

1) Where do I begin my search?

2) What measurements will I need in order to try to match these spacers?

Any point in the right direction is very welcomed. thanks

You will need the axle size, round or square, length of spacer, diameter on small end and diameter on larger end. Ken Sweet