Need a hitch/blade/blower?

[scoutcub]

Cub owners -

I was going to post this in classified, but thought it would get much better coverage here.
I've got a few front hitches, 60" front dozer blades, 48" blowers, and 54" blowers in my storage trailer that I'd like to sell. These are for the the older 5000, 6000, 7000 series Cubs. PM me if interested.....

 

[scoutcub]

I'll bump this up with some pics and the cold weather headed our way. I'm also quite certain (a dealer confirmed it) that this hitch will fit on a SC2400/2450. Obviously have to remove the loader first. Unsure about the bigger tractors....
The blowers in the pic are the 54" heavy-duty 2 stage with hydraulic chutes. Unused old stock blowers and hitches. You will need a PTO shaft kit.
Like to get around $2000 for the blower & hitch...
like to get around $1500 for the blade and hitch.
I've run the 54" on my 23 HP tractor, it will push it, just can't load it up. (as any blower)
I might have one smaller 48" blower left as well, made for the 23-26 HP machines. $1800 for that blower/hitch. The 54" was designed for the 28 HP tractor.
All items stored inside.

thanks!!

Frank

 

[Marty38]

Id love one of the 48" for my SC2400 but I don't have hydraulic s piped out back

 

[scoutcub]

Id love one of the 48" for my SC2400 but I don't have hydraulic s piped out back

Marty -
not sure I understand.....? it's a front mounted blower....



Frank

 

[Marty38]

Ahh. My mistake.

 

[scoutcub]

Ahh. My mistake.

No problem. I'm in the same boat, I've been told that the older hitch will fit the newer tractors. I recently got an SC2400 and when I get home in a few weeks I will drop the loader and mount the front hitch, to make sure it works. I think the biggest issue with the blower setup is the length of the driveshaft I have, is it the same as the older Cub SCUT. Not a big deal, I've had some driveshafts made that look better than the stock shafts.
I'm down to 1 48" blower left!
Will advise when I have it figured out....