Need a part for my Deutz

[garbuster]

I'm in need of a head and head bolts for a deutz. The engine is a 3L912. My granpa gave me the tractor. He started tearing it down about 5 years ago and never finished. In the process he lost one of the heads and the bolts. Can someone point me in the right direction.

 

[deutz]

We are a Deutz Distributor. If you can provide to me the engine serial #, I can ensure that the correct headbolt is selected and we can quote to you on this.

Regards

 

[garbuster]

Thanks I'll get it this weekend. Where is the serial number located on the engine?

 

[EFC]

Which model Deutz tractor is it?

Buck

 

[garbuster]

Don't really know. I'll look this weekend.

 

[garbuster]

This is what I came up with. The tag had this on it NR 6038816. PIN 70020. F3L912. 0826/15. PS S. HP 4. Hope this helps. The P in the PIN Could be a D

 

[sandman2234]

A quick search came up with a bunch of equipment that uses that engine. Apears to be high 40 to low 50 horsepower. Hopefully duetz can help you out with the headbolt and the head.
David from jax

 

[EFC]

This is what I came up with. The tag had this on it NR 6038816. PIN 70020. F3L912. 0826/15. PS S. HP 4. Hope this helps. The P in the PIN Could be a D

Any chance you have a photo we can look at?

Buck

 

[garbuster]

I'll take one this weekend

 

[RobJ]

You should be able to find new and/or used parts. The 912 series ran for a while. they were in 3-6 cylinders. F3L912, the F stands for a "mobile" engine (Deutz pronounced Doy-tz BTW, also builds very large stationary engines), the 3 number of cylinders, the L for Luft (air cooled) and the 912 series.

A W at the end means it has a pre-cup chamber in the head. Screw in injector, these were low emmission engines usually used in mines. Heads are different, head bolts are the same.

I rebuilt several hunder of these and other Deutz engines. I still some specs on these around the house somewhere.

Good Luck,
Rob

 

[garbuster]

didn't get a picture this past weekend due to rain. Will try again this weekend.

 

[garbuster]

I've been trying to post the pics but not having much luck. I tried to upload them in the photo gallery but it said they were to large and I don't know how to shrink them.

 

[RobJ]

I've been trying to post the pics but not having much luck. I tried to upload them in the photo gallery but it said they were to large and I don't know how to shrink them.

Google Microsoft Power Toys On the right hand side of the MS page look for the Imageresizer.exe program. Download and install. After install go to the picture you want to resize (you can also do a block at a time), on the pop up menu after the right click you'll see resize image. I use the 1024x760 size, click on more options and you can overwrite the current picture. Then upload the pictures to TBN.

This is what the 912 series looks like.

Rob

 

[garbuster]

Thanks RobJ. I've uploaded the pics. They're in the photos tab. Let me know if you need anything else. I still need to try and find parts to put it back together.

 

[garbuster]

Does anybody know where I can get a head and head bolts?

 

[pete-mi]

We should have some head bolts at work yet. We may even have a good used head. We sold Deutz tractors in the 70's and 80's and parts until last year. Give me a call at work mon-fri days 231-924-3420 and go over the details.