Loader Need help locating 232 parts manual

[TK421]

Good evening gentlemen.
I just purchased a 1986 MF 240 with the 232 loader on it. One of the hoses burst on me this afternoon. The 4 that come off the controls going to the loader are all dry rotted so I knew it wouldnt be long. Plus one tilt cylinder is leaking pretty badly too.
I would like to know if anyone has part numbers or a link to a parts diagram so I can get the parts ordered.
Thank you in advance.

 

[Dredwolf]

Good evening gentlemen.
I just purchased a 1986 MF 240 with the 232 loader on it. One of the hoses burst on me this afternoon. The 4 that come off the controls going to the loader are all dry rotted so I knew it wouldnt be long. Plus one tilt cylinder is leaking pretty badly too.
I would like to know if anyone has part numbers or a link to a parts diagram so I can get the parts ordered.
Thank you in advance.

Now I can finally help someone on the forum that gave me a lot of help these last couple of years.

I have have a MF 250 with a 232, and recently went through the grand adventure of replacing all the hoses and rebuilding a bucket cylinder after splitting the tractor to replace the SECOND transmission housing broken at the FEL mounts...again.

AGCO Parts Books

Use the "View Books" button at the guest user section, pick Massey Ferguson as the brand, and you are off and running.

The hoses can be made at most any hydraulic shop, some auto parts stores have the tools and supplies to make hoses on the spot. In my case, I had to go with Agco parts for the rebuild of the bucket cylinder, after trying local cylinder rebuilding shops for prices to rebuild and parts, and not having much luck.