Need help location ring and pinion for a NAA

Daveboys · Jun 6, 2013

I'm looking for a ring, pinion and carrier for an NAA. If you have something or know where I can find something please let me know.

skylarkguy · Jun 6, 2013

Try farmland, tangent Oregon. Hit or miss.

Soundguy · Jun 6, 2013

i checked wengers. has pinion.. rg shows as out of stock.

did an ebay search saw this. I'd check before I bought. not all them are interchangeable.. see what it really is

NAA Jubilee 600 601 2000 Ford Tractor Ring Gear and Pinion | eBay

there were other listings as well too.

might call alexanders too.

Juicybusa2 · Jun 12, 2013

Soundguy said:
i checked wengers. has pinion.. rg shows as out of stock.

did an ebay search saw this. I'd check before I bought. not all them are interchangeable.. see what it really is

NAA Jubilee 600 601 2000 Ford Tractor Ring Gear and Pinion | eBay

there were other listings as well too.

might call alexanders too.

I looked at his ebay set in person and IMO they are in relatively poor condition for the price. Sometimes desperate times call for desperate measures.

Daveboys · Jun 12, 2013

Juicybusa2 said:
I looked at his ebay set in person and IMO they are in relatively poor condition for the price. Sometimes desperate times call for desperate measures.

What kind of damage were you seeing on the gears?

Juicybusa2 · Jun 13, 2013

Daveboys said:
What kind of damage were you seeing on the gears?

Had two sets-one actually was naa ring and pinion-appeared to have substantial gear wear-pitted bearings and the center chunk was gouged from a presumed earlier failure. Ring gear rivets had been replaced with bolts. The other was a later model set that my sources say would not work in naa. Again this is personal opinion and you should always make your own judgement on these types of things. Not knocking these guys since they are generally a good source. The parts may very well be satisfactory for you but they definitely were not for me.