shanehobson
Silver Member
- Joined
- Jul 25, 2011
- Messages
- 109
- Location
- New Zealand
- Tractor
- Ford 3000 (x2), Kubota F1900, Kubota B2150HST, IH434, Same Minitauro 60, Zetor 6745 (x2)
Someone has asked me to obtain a manual for their New Holland 66 baler.
As far as I can tell there are at least three models which carry that or a similar name.
Super 66
Hayliner 66
just 66
His baler has a curved hump over the gearbox and is PTO driven. Knotter frame is uncovered and is sitting high above where knotters usually sit in more modern balers.
Flat sheet metal above the intake is low (lower than the knotters).
Any help correctly identifying this model would be appreciated.
Bonus points if you could direct me to operators and service manuals.
I've attached a photo to help.
As far as I can tell there are at least three models which carry that or a similar name.
Super 66
Hayliner 66
just 66
His baler has a curved hump over the gearbox and is PTO driven. Knotter frame is uncovered and is sitting high above where knotters usually sit in more modern balers.
Flat sheet metal above the intake is low (lower than the knotters).
Any help correctly identifying this model would be appreciated.
Bonus points if you could direct me to operators and service manuals.
I've attached a photo to help.
