spo307
Gold Member
looking for a place or someone who makes custom 3/16 galv cable with compressed ferrules and a spade bolt attached.
thank you dennis
thank you dennis
need help with custom made 3/16 galv cable with spade bolt
- Thread starter spo307
- Start date
- Views: 976
seasled
New member
Paul’s Wire Rope, Branford, Ct.
PILOON
Super Star Member
Easy, how many do U need?
chim
Elite Member
Unless that hole is cleaned up real well, lots of them
Looks like the cable will take a lot of abuse where it comes through the bolt.3Ts
Elite Member
Why not use a thimble in that wire loop and use a clevis to join the loop with the spade bolt?
herm0016
Platinum Member
i would not expect that to last long. use a cast eye bolt and a thimble or use a quick link between the spade and cable with a thimble in it. I hope you are not using this for any kind of structural application.
PILOON
Super Star Member
Is that a $10. part that U want to get for $2.00?
That poor vendor has overheads and taxes to pay and U need to support the American economy, LOL.
Make American great!
Actually what you really want is a swaged threaded cable end like they use for aircraft control cables.
I used to have the tools to do that and actually still have cable and probably the ends somewhere.
The tooling to swadge the ends I sold long ago and it went for serious $$'s being a rare tool in high demand with builder plane types.
That poor vendor has overheads and taxes to pay and U need to support the American economy, LOL.
Make American great!
Actually what you really want is a swaged threaded cable end like they use for aircraft control cables.
I used to have the tools to do that and actually still have cable and probably the ends somewhere.
The tooling to swadge the ends I sold long ago and it went for serious $$'s being a rare tool in high demand with builder plane types.
Last edited:
