I purchased a 16’ equipment trailer a while back which the previous owners had built boxes around the outside of the trailer forward of the fenders. The wood floor rotted out, and upon prepping to replace the floor, if found all kinds of sub-par welds… cracked, cold, no penetration, etc. I have fixed most of those issues.
While I have everything apart to fix welds, I’d like to wet-blast and paint the trailer. Here is where I need ideas. I want to build a rotisserie to make both blasting and painting easier. The issue is with those boxes built from angle and expanded metal, they throw off the center of gravity. So, I need some ideas on how I could build a rotisserie where the attachment/mount points can be adjusted vertically to account for the center of gravity shift.
Any ideas would be appreciated.
While I have everything apart to fix welds, I’d like to wet-blast and paint the trailer. Here is where I need ideas. I want to build a rotisserie to make both blasting and painting easier. The issue is with those boxes built from angle and expanded metal, they throw off the center of gravity. So, I need some ideas on how I could build a rotisserie where the attachment/mount points can be adjusted vertically to account for the center of gravity shift.
Any ideas would be appreciated.
