Need someone with a tape measure and a 914b backhoe...

[53gmc4x4]

Hi, I need a little help. I just bought a running 2410 with a 914B backhoe thrown in for free. It's missing the dipper and bucket cylinders and also the two links for the bucket. I found the part numbers, none of it is available through Bobcat, nor are any type of dimension. So, I'm here, hopeing one of you would be nice enough to measure your 914 and give me some rough measurements so I can build/piece it back together. I have the measurements for the pins, I need to know the cylinder lengths, bore, and mainly a good guess on the two links for the bucket. Not to the thousandth, just close. Thanks in advance for any help.

 

[Jabonee]

Confirmed. Cylinders NLA.:thumbdown: Found some specs if it helps. Arm. Bore 3.75" Rod Dia. 2.00" Stroke 30.1" Bucket Bore 3.5" Rod Dia 2.00 " Stroke 28.9". :thumbsup:

 

[53gmc4x4]

:cool2: Awesome! Thanks a ton Jabonee! Thats a good start to my shopping list, craigslst here I come!

 

[rodbuilder]

No - Northern Tool here you come!!!