Thinking of adding needle valve/s to get finer control of my hydraulic top link cylinder. I have one set of remotes (2 hoses with 2 QD). Do I need to add a valve on each hose or just one since I understand a needle valve restricts flow in both directions? Thanks.
Needle Valves
- Thread starter MrChris
- Start date
- Views: 1031
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,973
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
The purpose of a needle valve is to restrict flow . Same amount of flow in both directions.
The purpose of a flow control valve is to restrict in one direction, and free flow in the otherdirection
This needle valve has flow in both directions.
Surplus Center - 3/8 NPT 8 GPM PRINCE WNV-600 NEEDLE VALVE
This flow control valve has restricted flow in one direction and full flow in the other direction.
http://www.surpluscenter.com/item.asp?item=9-10440&catname=hydraulic
Meter in or out.
http://www.edgeroamer.com/sweethaven/mechanics/hydraulics01/default.asp?iNum=0504
Only one valve required.
The purpose of a flow control valve is to restrict in one direction, and free flow in the otherdirection
This needle valve has flow in both directions.
Surplus Center - 3/8 NPT 8 GPM PRINCE WNV-600 NEEDLE VALVE
This flow control valve has restricted flow in one direction and full flow in the other direction.
http://www.surpluscenter.com/item.asp?item=9-10440&catname=hydraulic
Meter in or out.
http://www.edgeroamer.com/sweethaven/mechanics/hydraulics01/default.asp?iNum=0504
Only one valve required.
Last edited:
