new 422

   / new 422 #1  

cqaigy

Silver Member
Joined
May 29, 2004
Messages
247
Location
Washington - West Cascades
Tractor
PT-422
Well I just got back from Overnite shipping depot at Seattle (Tukwila). An hour and half going up and hour fifteen going back, no traffic jams either way. /forums/images/graemlins/smile.gif

Anyway I got 422, rock bucket w/tooth bar (teeth bar?) /forums/images/graemlins/grin.gif brush cutter and blade. Got to use it for an hour before it got too dark.

Tomorrow I'm going to try the brush cutter for a couple hours then put the blade on to make sure nothing leaks. So far I'm pretty impressed, man that thing can sure turn tight. The treadles are alittle touchy but I'm getting used to it.

If I remember, I'll scan some pictures and post.
 
   / new 422 #2  
Congrats on the 422 purchase! /forums/images/graemlins/grin.gif I've had mine for about 2 months and like it too! Only "problem" I've had is the nut holding down the right pulley on the mower deck came off...but I caught it in time before any damage and replaced. My bucket has individual teeth that bolt onto the bucket...you have a bar? Bucket has become very useful to repair wash out damage to our lane from all the rain we've had. This past week-end I spent some time grooming the drainage ditch and am glad I did so since we've had over an inch of rain already today! I've become confortable with the treadles without any modification but Fourteen posted an inexpensive and interesting mod you may want to look at.
 
   / new 422 #3  
Congratulations on your purchase. Glad to see another proud owner of a PowerTrac in the West.
Keep us updated on the fun your going to have. /forums/images/graemlins/laugh.gif
PJ
 
   / new 422
  • Thread Starter
#5  
Well I ended up putting four hours with the brush cutter on our lane. It sure made quick work of those black berries and alders. It was real nice having the cutter out front, I was able to cut out past where the road drops off and since it's on a hill side the PT felt very stable. I got stuck in a hole but was able to walk it up out of the by turning left to right with power applied to the the wheels, kinda like a sideways inch worm /forums/images/graemlins/smirk.gif
 
   / new 422
  • Thread Starter
#6  
<font color="red">My bucket has individual teeth that bolt onto the bucket...you have a bar? </font>

My bad. /forums/images/graemlins/laugh.gif I haven't tipped the bucket up to look at the back side, but all the bolts that line up with each tooth so that would make sense.
 

Tractor & Equipment Auctions

CATERPILLAR D6R XL CRAWLER DOZER (A51406)
CATERPILLAR D6R XL...
2014 Dynapac CC4200 Tandem Vibratory Roller (A52128)
2014 Dynapac...
John Deere GP Tractor (A50514)
John Deere GP...
1996 Lincoln Town Car Sedan (A50324)
1996 Lincoln Town...
2015 DODGE RAM 1500 CREW CAB TRUCK (A51406)
2015 DODGE RAM...
2012 Volkswagen Jetta Sedan (A50324)
2012 Volkswagen...
 
Top