Shield Arc
Super Member
You made that cart?! OMG, that has to be the slickest cart I've ever seen in my life. You sure turn out some beautiful work! I think it's your attention to the little details that is so impressive to me.
New Dynasty 200 DX
- Thread starter Rob-D
- Start date
- Views: 4107
OP
Rob-D
Veteran Member
Thanks Guys!
SA, I'll check out the NH vent link. Thanks
4Shorts I saw the video on You Tube! Love it!!
I've been watching Jody for about a month or so and bought a couple of his Tig Fingers. Also I've been collecting Tig rod and consumables while saving up for the welder. I've got some 2% lanthanated in 1/16 and 3/32, also some ceriated, new Tig gloves, 308 SS, 309 SS, 70s -2, 4043 and 5356. (I may not come out of the shop until August!)
I've done a lot of O/A so I think I should be OK doing Tig with a little practice. I might sell my spool gun and the Miller 210 so I can move up to a 252 at some point. I have a tri-gas 'B' bottle I use for stainless that I think I'll trade for another 100% Argon. I never liked doing aluminum or stainless on the spool gun, you need to vary amps on those metals to really do it right.
SA, I'll check out the NH vent link. Thanks
4Shorts I saw the video on You Tube! Love it!!
I've been watching Jody for about a month or so and bought a couple of his Tig Fingers. Also I've been collecting Tig rod and consumables while saving up for the welder. I've got some 2% lanthanated in 1/16 and 3/32, also some ceriated, new Tig gloves, 308 SS, 309 SS, 70s -2, 4043 and 5356. (I may not come out of the shop until August!)
I've done a lot of O/A so I think I should be OK doing Tig with a little practice. I might sell my spool gun and the Miller 210 so I can move up to a 252 at some point. I have a tri-gas 'B' bottle I use for stainless that I think I'll trade for another 100% Argon. I never liked doing aluminum or stainless on the spool gun, you need to vary amps on those metals to really do it right.
4shorts
Elite Member
You made that cart?! OMG, that has to be the slickest cart I've ever seen in my life. You sure turn out some beautiful work! I think it's your attention to the little details that is so impressive to me.
Thanks guys. Ya I actually made the cart before I had the Dynasty. I had it ordered but had a running start on the cart by the time it arrived. I needed something that could hold a large bottle, hold filler rods, hold the cooler and had a storage unit in it and there was nothing available so I went out to the shop one evening after work and started building it. I had nothing in mind at the time and my wife asked me what I was planning and i said I didn't know but it would come to me when I started in. It sort of evolved over the month it took to complete working on it after hours. I built the Miller trailer around that time as well. Out of all my welding gear the Dynasty is the biggest money maker and just a great machine.
Thanks again guys
welding trailer - YouTube
Ed of all trades
Elite Member
Enjoy, and know that there are many of us wiping slobbers of the screen of our computers. Still waiting for the $$ to get mine and that is what I want.:cryingeyesout: