Hi all. As a new member I'm thankful for the ad. Currently, I'm in the process of installing a massey cb65 backhoe i purchased used but am missing the brackets for the tractor and backhoe. I'm sure this has been around before but my question is what are the part numbers for the tractor brackets and for the backhoe brackets for the 4 point quick mount? And another question, are they available from the manufacturer that made them for massey? I think ALO?
New GC 1705 Owner and Loving It
- Thread starter BigInch
- Start date
- Views: 1778
TBN Support
TBN Support
- Joined
- Feb 4, 2015
- Messages
- 4,561
Welcome to the forum!
:tractor: I'm going to move this thread over to our Massey section. Someone over there should know.
:tractor: I'm going to move this thread over to our Massey section. Someone over there should know.
not2old
Veteran Member
- Joined
- Oct 16, 2010
- Messages
- 1,255
- Location
- Scotch Creek, British Columbia
- Tractor
- 2010 Massey GC2610TLB
Don't let Massey know you are adding a backhoe. It will void your warranty. It has to be factory installed.
cdaigle430
Veteran Member
I think your best option is to find a salvage or totaled (for parts only) GC1710. You dont want a 3 point mount BH. This has been discussed before-
https://www.tractorbynet.com/forums/massey-ferguson-buying-pricing/354895-just-clarify-you-cant-add.html
https://www.tractorbynet.com/forums/massey-ferguson-buying-pricing/354895-just-clarify-you-cant-add.html
cdaigle430
Veteran Member
WranglerX
Super Member
Yeah... and just price it out.... Bet all the arms and bracketry will cost you several thousands of dollars...Sell the 1705 and get a 1710 or 1720...
Dale
Dale
olesz
New member
I just installed the CB05 to my GC1705 this past summer. The mechanical/structural portion is not that had, the hydraulics are a bit trickier as the service manual doesn't have the correct plumbing chart.
For the mechanical portion you will need the right and left arms. Don't be surprised if the dealer quotes you a different price for each.
The arms for the CB05 were SL156018/SL156019. It may have changed for the CB65.
Best reference is the Manual for the Backhoe on the AGCO Parts website under the subframe section.
Best of luck!
For the mechanical portion you will need the right and left arms. Don't be surprised if the dealer quotes you a different price for each.
The arms for the CB05 were SL156018/SL156019. It may have changed for the CB65.
Best reference is the Manual for the Backhoe on the AGCO Parts website under the subframe section.
Best of luck!
WranglerX
Super Member
Got a good reference for hydraulics, been trying to get power beyond on my 1715 and can not seem to find any plumbing parts and actual connection pointe on tractor...I know BH operates on power beyond so any plumbing diagrams will help....
Dale
,
olesz
New member
Best reference is in the service manual for the GC1700 Series. I will try to get a write-up done in the near future with the required parts and proper plumbing chart.