New GC2310 TLB

[2chesapeakes]

First off I'd liked to say hello to all being new to the forum. I have found alot of useful information and it helped in my decision to purchase the 2310. I do have a few questions:

1) When I put on a directional the oppisite side lights up solid while the other flashes. Is this how it is suppose to be.

2) When the tractor has been running for approximately 20 to 30 minutes I can hear a whining noise from the back either the back hoe or underneath the tractor. I found a post on this but no definative answer as to whether or not this is normal.

3) I had previously found a link in the forums to implement but can not locate again. If someone has already found the cheapest place online for box blades and other attachments could you let me know.

Ok after 15 hours of use (yes in the rain right side directional is hanging (stupid tree branch). Scratches and dings in hood from bucket being lifted to high ( stupid owner) directional switch broken (stupid tree branch) torn tie rod boot (don't know). Well the newness is gone and I can really start using the tractor now.

 

[2chesapeakes]

First off I'd liked to say hello to all being new to the forum. I have found alot of useful information and it helped in my decision to purchase the 2310. I do have a few questions:

1) When I put on a directional the oppisite side lights up solid while the other flashes. Is this how it is suppose to be.

2) When the tractor has been running for approximately 20 to 30 minutes I can hear a whining noise from the back either the back hoe or underneath the tractor. I found a post on this but no definative answer as to whether or not this is normal.

3) I had previously found a link in the forums to implement but can not locate again. If someone has already found the cheapest place online for box blades and other attachments could you let me know.

Ok after 15 hours of use (yes in the rain right side directional is hanging (stupid tree branch). Scratches and dings in hood from bucket being lifted to high ( stupid owner) directional switch broken (stupid tree branch) torn tie rod boot (don't know). Well the newness is gone and I can really start using the tractor now.

 

[jeepcj7]

In answer to number 1, that is normal. Its an SAE standard that is relativley recent.... less than 5 years I think.

 

[jeepcj7]

In answer to number 1, that is normal. Its an SAE standard that is relativley recent.... less than 5 years I think.

 

[JerryG]

1. I don't know what years MF / Iseki started doing that, but I had a 1999 MF 1250 that was that way and my MF 1440 does also.
2. Move your lift lever down a little to see if it shuts up.
3. I don't know who is the least expensive now, but Carver Equipment, Carter and Carter, Messicks and Sweet are all dealers and members here that have sold a LOT of equipment to other members. If you click on the "Dealer" tab at the top it will take you to the addresses of these dealers and other.
Welcome to TBN!

 

[JerryG]

1. I don't know what years MF / Iseki started doing that, but I had a 1999 MF 1250 that was that way and my MF 1440 does also.
2. Move your lift lever down a little to see if it shuts up.
3. I don't know who is the least expensive now, but Carver Equipment, Carter and Carter, Messicks and Sweet are all dealers and members here that have sold a LOT of equipment to other members. If you click on the "Dealer" tab at the top it will take you to the addresses of these dealers and other.
Welcome to TBN!