New guy and some projects

   / New guy and some projects #1  

GregbkH

Gold Member
Joined
Jun 1, 2011
Messages
351
Location
Wisconsin
Tractor
2010 New Holland 3045
About 3 weeks ago I received delivery of my 2010 New Holland 3045. I configured it to include a FEL, backhoe and Land Pride RBT3584 rear blade. It also has 3 rear remotes and all 4 tires are filled with rim guard.

This is my first tractor and keep it on my future retirement property. Sadly, I only get to play with it on weekends. So far I've tried everything out. :)

Backhoe, took out 5 unwanted stumps.


IMG_0517.jpg


RBT3584

Graded about 600 feet of my easement (practice) and cut in a small ditch along my driveway.

HPIM1705.jpg


HPIM1706.jpg


HPIM1707.jpg


Removed some rock and dirt

HPIM1709.jpg


HPIM1715.jpg


Cut a shallow ditch, when finished, the rock goes back along the bank.

HPIM1714.jpg


HPIM1716.jpg


The wife has done a lot of stone work around the fire pit and garage. I was the grunt, she is the brains! :)

Thanks for looking

HPIM1713.jpg
 
   / New guy and some projects #2  
Very nice stuff there, Greg. With all that really nice equipment, I hope you bought one more thing you didn't list: a very nice grease gun. That backhoe should be greased every day you use it and the same for the loader. The blade can probably go for 25 to 50 hours though. I'm not sure what LandPride recommends. I'd bet you are gonna love working that tractor, especially with the three remotes for future things like a grapple and maybe TnT. That is one dream rig.:thumbsup:
 
   / New guy and some projects #3  
Good looking tractor and a smart choice of implements.
With a fire pit and all of those trees I would imagine one or two will need to come down-where is your 3-PT wood splitter?;) Mine splits three cord a year for the past eight years attached to the TC-40S.
 

Attachments

  • Woodsplitter 1.JPG
    Woodsplitter 1.JPG
    148.4 KB · Views: 122
   / New guy and some projects
  • Thread Starter
#4  
Guys, thanks for the comments.

jinman, I did forget to list a grease gun, but I did get a fairly decent one. I got a tube fed, one hand pump model and have become very familiar with using it. I already love the hyd remotes and can't wait to add more implements, especially a grapple and TnT. Thanks again.

nickle plate, with about 43 acres of woods, I don't think I could even keep up with the blow downs that occur each year. You are right, the fire pit means that fire wood is a necessity (wifey says so). She is so into having a nice fire to enjoy and cook over that she went and bought a 25 ton wood splitter this spring. We too have ran 3 cords through it this year. Wisconsin has been having some pretty windy weather this year. I just cut up a 22" maple last Monday and my neighbor informed me today that I've got another waiting for me when I get there tomorrow. I have an 017 and a MS 361 with plenty of chains and fuel. When I'm up there, it don't really seem like work. I enjoy it. Thanks for your comments.
 

Tractor & Equipment Auctions

2004 International 4300 Box Truck, VIN # 1HTMMAAMX4H667102 (A51572)
2004 International...
MI-T-M PRESSURE WASHER (A52472)
MI-T-M PRESSURE...
2020 INTERNATIONAL LT625 (A52472)
2020 INTERNATIONAL...
2239 (A51244)
2239 (A51244)
2018 WACKER NEUSON CORPORATION DBA WACKER NEUSON LTV6 LIGHT TOWER (A52472)
2018 WACKER NEUSON...
2013 Yamaha YDREx4 Electric Golf Cart (A51691)
2013 Yamaha YDREx4...
 
Top