New Holland 716B snowblower

[Rice Creek Farms]

Hey everyone, new to the site and hoping I can get some insight on an attachment. I own a New Holland TC33DA tractor and am looking to put a new holland 716b snowblower on it. The blower came off a tc33 and I’m not sure if it will fit a tc33da or not? Anyone have any experience with this. I would just haul my machine to see for myself but the blower is 6 hours away. Thanks in advance!

 

[Halftrack]

RCF welcome to TBN. Information I came up with concerning your desire to mount a 716B on a TC33da. The factory snowblower for the TC33da is model # 63CSH and If you go to Messick's website and compare the mounting subframe for the 716B and the 63CSH, there is a considerable difference between the two. The 63CSH is referred to as a Quick hitch setup and there is a youtube video (

) of two guys removing a loader and then mounting a 63CSH on a TC33da.

Keep in mind you need the FEL hydraulics to operate the snowblower. It appears the mounting hardware for the 63CSH does not interfere with the loader mounts at all. I am not sure if the 716B would match the TC33da or if you might have to remove loader hardware to accommodate the snowblower. If you have supersteer or the tractor it came off of has supersteer, throw another wrench into the swap and consider another option. Good luck!!!!

 

[Rice Creek Farms]

Thanks for the info! I keep getting conflicting answers and figured this may be a better place to ask.