New Isekin owner, needs manuals and filters

[eppoh]

Hello all,
I am new to tractors and Iseki. Just bought a low time Iseki TS1610 that needed a radiator. Has pretty new Maschio mower on the back.

In the process of getting a few things taken care of. The tractor sat out under trees for years, so faded a bit, but running good other wise. Just put a core in the radiator.

I have no manual for it and the labels on the controls are gone. Only one of the dash lights work ( one on far right)

Can't find air or oil filter applications for it . I like Wix.

Any help and advice appreciated.

 

[rich_ncal]

The air filter is hard to find. I recommend you remove your air filter and measure the distance from the screw mounting point to the bottom of the housing. Mine measured 9.25inches. I just installed a Fram CA3659SY air filter in my TS1610. It fit but is a $30 air filter.

Some people use a Fram CAK530 air filter. That is a shorter air filter. 7.25" total length. I think with CAK530 they use a custom spacer made out or metal or plastic to fill the rest of the length, or they modify the filter mounting bracket. The advantage is the CAK530 is a $15 filter.

I used a Fram PH3600 oil filter. This has 3/4-16 threads. Some posts on this site claim the TS1610/1910 have metric 20mmx1.5mm threads on the oil filter.

When you change the oil filter take a close look at the size of the mating surface of the gasket to be sure you have the right diameter filter gasket. The Wix 51568 & Napa 1568 are mentioned in some posts as the 20mmx1.55mm thread filter that will fit.

 

[eppoh]

I bought a WIX oil filter that is supposed to fit the Isuzu 2AB1 engine, which I think is the same as the 2AA1 except for the injector pump and max rpm. Have not installed the wix yet.