New Saw on the Way!!!

   / New Saw on the Way!!! #1  

GeneD14

Veteran Member
Joined
Jul 29, 2003
Messages
1,458
Location
Tennessee
Tractor
Kubota B26 TLB, Allis Chalmers D17 series IV, Kubota ZG-23 Mower, Kubota ZD 1211, Kawasaki Mule 610, Stihl 361, Stihl 045 AV Super, and a Stihl 660 Ported and tuned
For the last few years I have been using smaller saws to cut bigger logs. I have been dreaming about having a Stihl 660. I was finally able to order one with a 36" bar and skip tooth chain. It should be in by this weekend. I already have a large log lined up to be it's first victim.
I will post pics as soon as I can.
 
   / New Saw on the Way!!! #2  
Just don't cut your **** leg off with that beast my friend. Where some chaps. Those bigger saws can jump around like a smaller saw with that power head and chain combo.
 
   / New Saw on the Way!!! #3  
Grab some ear plugs. Mine is very loud and it'll wear you down at the end of the day. Congrats.

Brett
 
   / New Saw on the Way!!!
  • Thread Starter
#4  
Good advise! I always wear chaps and two years ago they saved my left leg. I will never cut without them again. As far as ear protection: I wear the Stihl ear muffs and they seem to work well.

Attached is a picture of my current little saws.
 

Attachments

  • image-424873643.jpg
    image-424873643.jpg
    467.9 KB · Views: 386
   / New Saw on the Way!!! #5  
Get you a dual port cover to help it breath and might need to adjust carb a hair richer. The factory exhaust outlet on the side is so small on these new saws. :confused2:
That way you dont have to do any modding on the new muffler and axe your warranty doing so. ;)
 
   / New Saw on the Way!!!
  • Thread Starter
#6  
Thanks for the info on the dual port muffler.

I've seen some saws on ebay that they switched to the big over bore piston. I bet those really can chew through a lot of wood fast. :)
 
   / New Saw on the Way!!! #7  
   / New Saw on the Way!!!
  • Thread Starter
#8  
LOL it might as well be a dealer display, by the time this transaction is through I have just about paid for one! ;)
 
   / New Saw on the Way!!! #9  
The 660 is a really nice saw for sure, we don't use ours a whole lot, but when needed it sure goes through a big log.
 

Tractor & Equipment Auctions

2017 Ford F-450 Altec AT200A 36ft Bucket Truck (A50323)
2017 Ford F-450...
2013 Chevrolet Caprice Sedan (A50324)
2013 Chevrolet...
2007 Amkus Rescue System (A50322)
2007 Amkus Rescue...
2007 Mitsubishi Fuso FE84D 16ft Dovetail Flatbed Truck (A50323)
2007 Mitsubishi...
2001 Ford F250 Pickup (RUNS) (TITLE) (A50774)
2001 Ford F250...
2015 Volkswagen Passat SE Sedan (A50324)
2015 Volkswagen...
 
Top