TBob42
Member
Greetings, not sure if this is the place to do it but since most of my early focus with his beast will be hydraulic in nature I thought I'd start here. I've actually got quite a bit of experience with Kubotas, Bobcats and Gradall & JLG machines. We rented Kubotas including 4200. Mostly gear type. I recently acquired a 4200 and now I can ditch my Bobcat 763.
My plan is to add rear remotes and a third function on the loader. A hydraulic top link and tilt cylinder is on my list.
So that's me for now.
Does anyone have a loader with a twin or triple stick control valve. I believe they were sold by Kennedy. I'm thinking of replacing my control valve because the spools are sloppy and fine control is difficult. I'm running the LA680 but I'm probably going to need after market valves.
My plan is to add rear remotes and a third function on the loader. A hydraulic top link and tilt cylinder is on my list.
So that's me for now.
Does anyone have a loader with a twin or triple stick control valve. I believe they were sold by Kennedy. I'm thinking of replacing my control valve because the spools are sloppy and fine control is difficult. I'm running the LA680 but I'm probably going to need after market valves.
