Quardz
New member
- Joined
- Jun 5, 2015
- Messages
- 18
- Location
- Fairhaven
- Tractor
- Bolens Iseki H1502 & a Bolens 1225 Hydrostatic
Hi All,
I picked up a Bolens Iseki H1502 Hybrid tractor from Muncy, PA a couple of weeks ago. An 18 hour round trip from Fairhaven, MA. It came from an estate sale with only 190 Hrs. on it for only $2,900! It is as beautiful as a tractor can be.
The mowing deck is solid but needed new spindle housings which already showed up from Rays .. The snow/dirt blade, a 53 " model 19220, was retrofitted to be attached to the rear supports under the tractor and lifted with the cables with the rear PTO.
The snow blower is a model 18311..... hmmmm.. Here in lies the booger in the puddin'.... After reading some other posts and theads, I checked the rotation of the blower, and it must spin in the clockwise direction. The PTO, model 1308 spins in the counter clockwise direction.
So, I will be looking to trade/ swap/ sell my very good condition, garage stored Model 18311 snow thrower that I've owned for 2 weeks for a good conditon model 17377 snow blower. I do not have the lifting rod that goes with it though... Also, this tractor does not have the hydraulic lift mechanism for the front of the unit. Can a model 17377 be mounted without this unit? If not, I guess I'll need the unit also with the snow blower.
If anyone has any info or would like to buy / trade snow blowers, please email me.
Ed M.
quardz@comcast.net
I picked up a Bolens Iseki H1502 Hybrid tractor from Muncy, PA a couple of weeks ago. An 18 hour round trip from Fairhaven, MA. It came from an estate sale with only 190 Hrs. on it for only $2,900! It is as beautiful as a tractor can be.
The mowing deck is solid but needed new spindle housings which already showed up from Rays .. The snow/dirt blade, a 53 " model 19220, was retrofitted to be attached to the rear supports under the tractor and lifted with the cables with the rear PTO. The snow blower is a model 18311..... hmmmm.. Here in lies the booger in the puddin'.... After reading some other posts and theads, I checked the rotation of the blower, and it must spin in the clockwise direction. The PTO, model 1308 spins in the counter clockwise direction.
So, I will be looking to trade/ swap/ sell my very good condition, garage stored Model 18311 snow thrower that I've owned for 2 weeks for a good conditon model 17377 snow blower. I do not have the lifting rod that goes with it though... Also, this tractor does not have the hydraulic lift mechanism for the front of the unit. Can a model 17377 be mounted without this unit? If not, I guess I'll need the unit also with the snow blower.
If anyone has any info or would like to buy / trade snow blowers, please email me.
Ed M.
quardz@comcast.net
