/ New to me jd 755 has no front hydraulics , apparently a base model, is it worth retrofitting ports and controls
#1
New to me jd 755 has no front hydraulics , apparently a base model, is it worth retrofitting ports and controls
- Thread starter Jd-lox
- Start date
- Views: 759
-
- Tags
- john deere 755
/ New to me jd 755 has no front hydraulics , apparently a base model, is it worth retrofitting ports and controls
#2
pmsmechanic
Elite Member
- Joined
- Dec 6, 2013
- Messages
- 4,215
- Location
- Southern Alberta, Canada
- Tractor
- 4410 and F-935 John Deere, MF 245
We need more info. Do you need front hydraulics? Can you do the installation yourself? Can you find the kit somewhere? For sure that JD won't stock it anymore.
/ New to me jd 755 has no front hydraulics , apparently a base model, is it worth retrofitting ports and controls
#3
/ New to me jd 755 has no front hydraulics , apparently a base model, is it worth retrofitting ports and controls
#4
jeff9366
Super Star Member
- Joined
- Jan 14, 2011
- Messages
- 12,777
- Tractor
- Kubota Tractor Loader L3560 HST+ ~~~~~~~~~~~~~ 3,700 pounds bare tractor, 5,400 pounds operating weight, 37 horsepower
No.
Sell the tractor you have now. Buy a 4-WD tractor with a working FEL.
Loader alternatives:
USA or Canada Manufactured TRACTOR 3-Pt. TRANSPORT BOXES / DUMPING CARRYALLS
I have a Kubota B3300SU with 58" FEL bucket, 59" tire width. There are occasions when it would be efficient to have a 60" or 72" flat bottom TRANSPORT BOX on the 3-Pt. hitch to carry additional dirt, tools, firewood and/or debris with the FEL bucket full. In promo videos Transport Boxes are...
www.tractorbynet.com
Tractor Dirt Scoops:
Last edited:
/ New to me jd 755 has no front hydraulics , apparently a base model, is it worth retrofitting ports and controls
#5
jeff9366
Super Star Member
- Joined
- Jan 14, 2011
- Messages
- 12,777
- Tractor
- Kubota Tractor Loader L3560 HST+ ~~~~~~~~~~~~~ 3,700 pounds bare tractor, 5,400 pounds operating weight, 37 horsepower
New member
Hello friends. I'm new here and I have a couple of questions. I just bought 3.5 acres in Missouri and I'm looking at a 1985 Satoh S650G Bison. It has 6166 hours, inline 4, 3 point hitch, runs well according to the seller, and it's $2750. So, 1) is that a good deal? and 2) Is there a list of loaders somewhere that would fit that tractor with little or no modification? Thanks in advance for the help.
This is a gas engine tractor. 6,000+ hours is quite a lot of use for a gas engine tractor.
Are you adept at troubleshooting and mechanical repairs? Do you have metric tools?
Parts for 40+ year old orphan-brand tractors are very thin.
Can you operate equipment with a traditional clutch and gear transmission? Shop tractor clutch rebuilds are $1,500 in low cost, rural Florida.
Manual steering gets old fast.
2-WD tractors often lack the necessary traction to fill a loader bucket with dirt.
Aftermarket Loaders are available for most tractors. I will guess your cost at $4,500 delivered.
LINK: Front-End Loader - Compact Tractor Aftermarket Loader Suppliers
You would likely need a new, higher capacity hydraulic pump, joystick and plumbing, +$2,000.
Plus labor for installation.
CAVEAT EMPTOR
