bjr
Veteran Member
Okay, I've got the new bearings and the knifes and shield should be arriving soon I'm gonna go back together with plunger and the manual isn't real specific on just how to get the knife blades adjusted when installing the plunger. Will I be able to get to the knife nuts to tighten when the plunger is in the chute I know I will have add or subtract shims for the knife clearances, so I hoping that I'll be able to get to the nuts somehow. I do have the bale compression slide removed from the top so I'm hoping the shimming operation won't be to big of a ordeal. Are there any experience plunger mechanics out there with some advice? bjr