Southernspeed
Silver Member
I've made around 60 bales with this baler since I bought it in the Spring. Apart from a driven sprocket bearing incinerating itself it's done well, but .... on every bale I get a 4-6 foot length of twine laying on the ground so I have to get off the tractor and tie every one so I don't run over it with the tractor front wheel when picking them from the field.
Am I doing something wrong or is this just how they are? (yes it's a shaggy looking bale, after a day and a half delay to repair the baler it was all very dry!)
Am I doing something wrong or is this just how they are? (yes it's a shaggy looking bale, after a day and a half delay to repair the baler it was all very dry!)
