NH T1510 2008 - increasing back hydraulic outlet

[OttawaT1510]

I only have one back hydraulic outlet at this time.
Would like to increase this feature to potentially 3 - for toplink, snowblower chute and deflector hydraulic functionality.
Any suggestions as to where should I start...especially since this is small tractor not to much room to play with.

 

[OttawaT1510]

Re: NH T1510 2008 - increasing hydraulic capability on T1510

I only have one back hydraulic outlet at this time.
Would like to increase this feature to potentially 3 - for toplink, snowblower chute and deflector hydraulic functionality.
Any suggestions as to where should I start...especially since this is small tractor not to much room to play with.

Based on other threads... I had it backwards.
It seems like the PB hose, which use to feed my backhoe, coming from the loader area has to feed whatever remote valve I'll install for use of my snowblower chute, deflector and toplink. Then I'll send a return hose from the remote to the hydraulic insert which is located below my seat.

I'd like to know whether there are any preferred/recommended remotes/valve for this type of set-up, and anything else I might be forgetting.