3-Point Hitch NH TN65 year 2000 faults code help needed

   / NH TN65 year 2000 faults code help needed #1  

TKAdenmark

New member
Joined
Mar 27, 2017
Messages
8
Location
Gestelev, Denmark
Tractor
TN65F
Hi
I have bought a NH TN65V from 2000. It is trying to tell me a error code, think it is 24, followed by 35. It is with the electric controlled lift(3 point hitch).
The blinking is on the right fender.
Does anyone have the right repair manual? And sharing :)
I did find a repair manual on eBay, but not sure it is the right one! It is stamped November2002, is it for at 2000 traktor or a newer version? So I have not ordered it yet!
Hope some of you can help!

Thomas from Denmark
 
   / NH TN65 year 2000 faults code help needed #2  
TN's marketed in North America do not have Electronic HPL. But error code 24 was used across all NH platforms at the time to denote a controller that needs to be calibrated. If the 2002 manual says TN65V you should be good to go. If not for a 'V' configuration, I would pass.

You can identify the proper manual here; even purchase and download.

http://www.dmcretail.com/productSearch.aspx
 
   / NH TN65 year 2000 faults code help needed
  • Thread Starter
#3  
Hi RickB
Your link is not working, or is it just me?(first link is working, but not the link on the page)
The repair manual is in US, and I think the manual is always just saying TN65 -TN90, no letter after.
The V is "special tractor"
 

Tractor & Equipment Auctions

1975 Dodge 600 Grain Truck (A50514)
1975 Dodge 600...
2023 Case IH 4412F 12 Row 30 In. Row Spacing Folding Corn Head (A50657)
2023 Case IH 4412F...
1999 24DTA pintle hitch trailer (A51039)
1999 24DTA pintle...
TEST BID LOT (A50775)
TEST BID LOT (A50775)
2019 Ford F-550 Bucket Truck (A51039)
2019 Ford F-550...
2003 STERLING ACTERRA ROLLBACK (A51222)
2003 STERLING...
 
Top