NX5510 HST Question

[DieselBound]

Welcome!

As others have said, just push the dealer to get on this ASAP. Keep in mind that the dealer is paid to make factory warranty repairs, so they really shouldn't be all that hesitant to rectify. The best approach is to view all such things as a "we're going to resolve this TOGETHER" situation. I think that in some instances people play the combative card too early: save those cards in case needed later on when they'd really be needed.

I just chastised a shock manufacturer for making me pay shipping costs for replacement of a brand new shock (never mind my additional costs for mounting hardware -single use- and my TIME). I paid for THEIR crappy QA. And from now on I'll go about testing BEFORE I install: I was fortunate in that it wasn't a strut!

 

[Cthomp55]

Thanks guys for the reply's. The dealer picked it up yesterday and called today saying they were bringing it back. Basically something was unplugged underneath the tractor. I did crawl under the machine and noticed nothing unplugged prior to them picking it up.. I plan on running the heck out of it this evening..

 

[GregP27]

Might be worth crawling under there and taking some pics of all the connectors you can find and carefully naming them, so you can regognize them later.

I'd be that Eric's rant on skid plates might come back to haunt you, and you might want to fabricate at least a partial plate yourself.

In any case, as has been said, good luck and I'd bet you'll be a happy owner quickly.

 

[yujrtnortho85]

Old thread but this has happened to me as well. I called the dealer and service department. They knew right away to check a certain connector under the tractor. They said it was a wire pulling out of a connector underneath the tractor. Red and green pair of wires if I remember correctly. The wire had pulled out of the connector to prevent a connection but not enough to pull out of the connector completely. It may or may not be a similar issue. I値l crawl back under and find out which one it was. I just pushed the wire back into the connector and it fixed my 田al light coming on and off and making the transmission inoperable. This has happened three times before I electrical taped it and strain relieved it and hasn稚 happened again