Oil & Fuel Oil Fill TC45DA

   / Oil Fill TC45DA #1  

HOUNDSTOOTH

Silver Member
Joined
Jun 28, 2006
Messages
119
Location
SOUTHWEST GEORGIA
Tractor
2007 NH TC45DA
I just bought a TC45DA. I was reading throught the manual and stapled to the cover was a yellow print-out giving detailed instructions on adding oil. It said to remove the dip stick and very slowly add oil. It said if using a funnel, to never let the oil build up. Make sure that a steady stream runs through the funnel.
Do you know anything about this?
 
   / Oil Fill TC45DA #2  
I've got the same tractor and if you pour to fast it just makes a mess.. thanks all..
 
   / Oil Fill TC45DA
  • Thread Starter
#3  
I can't remember exactly, but I think it said something about oil getting somewhere that it shouldn't if you fill to much to fast. I don't get it. When the engine is running, oil is going all over the place inside. It also said to wait a min. of 5 minutes before starting the engine.
 
   / Oil Fill TC45DA #4  
I have had fresh motor oil run out the crankcase vent tube when adding oil faster than it can run down from the top of the cylinder head to the crankcase. Newer TC's have no external crankcase vent; Gasses are vented to the intake. Pulling the dipstick helps to vent the crankcase to allow added oil to drain from the top of the head to the oilpan faster than it would with the dipstick in place.
 

Tractor & Equipment Auctions

1992 SYLVAN 20' PONTOON BOAT (A51243)
1992 SYLVAN 20'...
John Deere 400 Rotary Hoe (A50514)
John Deere 400...
2007 KOMATSU PC27MR-2 EXCAVATOR (A51242)
2007 KOMATSU...
HOMEADE 4 BOLSTER LOG TRAILER (A51243)
HOMEADE 4 BOLSTER...
2019 Ford F-150 XL (A50120)
2019 Ford F-150 XL...
NAMCO GRAIN-O-VATOR GRAIN WAGON (A51243)
NAMCO...
 
Top