Oil & Fuel Oil Level in 3325

   / Oil Level in 3325 #1  

DonWorrell

Gold Member
Joined
Nov 1, 2003
Messages
348
Location
Pleasant View, TN
Tractor
Mahindra 3325
The oil dipstick on my 3325 doesn't have a full or low mark. All I have is two small holes on the dipstick. Is the bottom one needs oil and the upper one is full. Is there a quart difference between the two holes?

Here is a crazy question but a serious one to me! The manual says with an oil filter change the engine needs 1.6 gallons of oil. I understand 1.5 gallons is 6 quarts. But how much is 1.6 gallons? Now you jnderstand why I am concerned with the full mark.

Don
 
Last edited:
   / Oil Level in 3325 #2  
The oil dipstick on my 3325 doesn't have a full or low mark. All I have is two small holes on the dipstick. Is the bottom one needs oil and the upper one is full. Is there a quart difference between the two holes?

Here is a crazy question but a serious one to me! The manual says with an oil filter change the engine needs 1.6 gallons of oil. I understand 1.5 gallons is 6 quarts. But how much is 1.6 gallons? Now you jnderstand why I am concerned with the full mark.

Don

Don,

Yep, the 2 holes are the full and add marks. How much is 1.6 gallons? 1 glug more than 1.5 gallons :thumbsup:

When I change the oil on my 3525 (same engine), I just add 6 quarts, and be done with it. It always is at the top hole even though I changed the filter also.

By the way, I'm using Motorcraft FL1A for my oil filter... mucho cheaper than the Mahindra filter.
 

Tractor & Equipment Auctions

2013 John Deere 824K (A51039)
2013 John Deere...
2014 Chevrolet Impala Limited Sedan (A48082)
2014 Chevrolet...
(1) Push Blade and (1) Disk (A50860)
(1) Push Blade and...
BUSH WACKER ST-180 ELITE BATWING ROTARY MOWER (A51406)
BUSH WACKER ST-180...
JLG 1255 Telehandler (A51039)
JLG 1255...
UNUSED Black Steel Diamond Plate (A50860)
UNUSED Black Steel...
 
Top