marshallcro
Member
- Joined
- Dec 12, 2013
- Messages
- 46
- Location
- Stanfordville,ny
- Tractor
- John Deere 3720, Farmall Cub, Bobcat 3400
What is torque setting for the oil plug for a JD 3720. Thanks in advance.
Oil plug 3720
- Thread starter marshallcro
- Start date
- Views: 3978
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,549
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Snug 
Spindifferent
Gold Member
My 3520 manual says "Install drain plug. Do not overtighten." Snug is probably best.
texasranger556
Platinum Member
Go till it strips then back it off 1/2 turn.
/Kidding
+1 for snug
/Kidding
+1 for snug
Spanner
Veteran Member
+2 :thumbsup:
:wrench:
:wrench:
DLTTrekkers
Veteran Member
Silicon on plugthread and it will never leaks
Aren't there two oil plugs on a 3720?
I don't know which "oil plug" the OP was referring to but according to the 3720 operator's manual there are two engine oil drain plugs. Interestingly, the parts illustration shows two different engines used in the 3720 and on both they only show one drain plug on the oil pan.
There are THREE oil drain plugs on the front axle. There is ONE drain plug for the transmission.
