Most three point bhs should have a Ridgid toplink with one pivot point not two. At least mine did. I used a old pair of mini vice grips to lock the lift lever on my old Kubota.
Opinion on previous owner's rationale for welding 3PH lever
- Thread starter Husaberger
- Start date
- Views: 3438
JWR
Elite Member
- Joined
- Apr 19, 2011
- Messages
- 4,022
- Location
- So MD / WV
- Tractor
- MF 2660 LP, 3 Kubota B2150, Kubota BX2200, MH Pacer, Gravely 5660, etc.
You know, I am just beginning to appreciate your humor!Why would you do that when you got a rod burner sitting there doing nothing?
OP
Husaberger
Silver Member
Thank you to everyone that has posted
Learning a lot about 3PH backhoes. Surprisingly different from frame mounted BH on my L4740
Learning a lot about 3PH backhoes. Surprisingly different from frame mounted BH on my L4740
4570Man
Super Star Member
- Joined
- Apr 7, 2015
- Messages
- 18,943
- Location
- Crossville, TN
- Tractor
- Kubota M59, Kubota L3800, Grasshopper 428D, Topkick dump truck, 3500 dump truck, 10 ton trailer, more lighter trailers.
If you already have a subframe backhoe I’d recommend just removing and selling that backhoe to someone else to break their tractor with.
