Owner/Shop manual Yanmar 3110

[RogueRifleman]

I have a Yanmar 3110 circa 1985 (I think). I'd like to get the detailed manual so I don't miss any service gochyas - ie "where is the hydraulic system filter?"

Does anyone out there have a manual for this specific tractor for sale? or can I pay for repro?

I don't want any 3rd or 4th party copy junk that's barley legible.

thanks in advance,

Ken

 

[normde2001]

There are no factory OEM English manuals for gray market tractors. Best bet is a manual for a similar US model from any Yanmar parts dealer. In your case would probably be for a YM336.

 

[RogueRifleman]

Thanks for the note. I'll check out that US model. You're the 2nd person I've heard use the term 'gray market'. I'm told that my Yanmar is considered gray market due to the variable speed pto and several other missing items that are designed to protect knuckleheads

 

[normde2001]

If you are un-familiar with gray market tractors, yet own one, I suspect you are for an awakening.

 

[kenmac]

You can buy some if not all of those missing items if you want them:thumbsup: Hey, that 3110 is a good tractor.. And...Welcome to tractorbynet

 

[farmfun]

I have a Yanmar 3110 circa 1985 (I think). I'd like to get the detailed manual so I don't miss any service gochyas - ie "where is the hydraulic system filter?"

Does anyone out there have a manual for this specific tractor for sale? or can I pay for repro?

I don't want any 3rd or 4th party copy junk that's barley legible.

thanks in advance,

Ken

The 3110 is a great tractor and the 336 manual will cover what you need. Make sure you get thick tech book its worth the price. You can get here from at least 3 dealers - these guys are sharp and will make your owning experience a pleasure. The filter your looking for is covered by a small trianglar plate - retained by 3 bolts and its located under the PTO shaft.
One thing we don't have is the 336's external spin on filter...

 

[RogueRifleman]

The 3110 is a great tractor and the 336 manual will cover what you need. Make sure you get thick tech book its worth the price. You can get here from at least 3 dealers - these guys are sharp and will make your owning experience a pleasure. The filter your looking for is covered by a small trianglar plate - retained by 3 bolts and its located under the PTO shaft.
One thing we don't have is the 336's external spin on filter...

Thanks for all the notes. I don't mind it being a gray-market tractor at all. We've had it since '97 - and it's been quite reliable. We've been lucky so far - being able to cross the basic air, oil, fuel filter to some john deer part equivalent (yes I know jd engines are yanmar).

Who's the dealers here that have the 336 manuals? I'd get both the owner's and the tech manual. I feel like I have not done the hydraulic system the goodness that it deserves (no tech info).

thanks

 

[kenmac]

Who's the dealers here that have the 336 manuals?

Hoye tractor,, danny parker, ernie, Wayne @ LMTC

 

[normde2001]

Thanks for all the notes. I don't mind it being a gray-market tractor at all. We've had it since '97 - and it's been quite reliable. We've been lucky so far - being able to cross the basic air, oil, fuel filter to some john deer part equivalent (yes I know jd engines are yanmar).

Who's the dealers here that have the 336 manuals? I'd get both the owner's and the tech manual. I feel like I have not done the hydraulic system the goodness that it deserves (no tech info).

thanks

After 13 years?

 

[Desert Tractor]

Just "checking in" -- Taking a trailer out to look at a 3110 (4wd, so that would put it in the "D" class as I understand it) Saturday, all should be fine and if so will haul it back (he's asking $5975 with FEL and box scrapper). The tractor is green so from my research that tells me it came from G&S equipment.. any bad things to say about that?

Tractor has 1100 hrs on it according to owner and no visible leaks... this thing is located 136 miles from me, so I haven't seen it in person yet. I already know it hasn't been run consistently in the past couple of years and has a dead battery, but can jump it and check it out.. if all looks good then it is coming home to go to work.

I have been reading these pages for a few weeks and kinda gave up on the Yanmar line because they are far and few between out here and then this thing pops up... lucky me -- I liked the Yanmar line right off the bat, but have been calling on other tractors recently because there was nothing in the area and I hadn't decided to "ship" yet... and then again the 3110 is not that common (it seems) on the current, "for sale" market.

Anyway, enough of the BS -- I have 10 acres I am moving to right now and it will be working there considerably -- less than a quarter mile away I have another 5 acres to perform work on... and then there is my brother and friends properties that need some work... about 50 acres in all that I can see moving dirt/grading and digging post holes. There may be some plowing on my land also... light stuff.

I am really looking forward to running this tractor and hauling it back if all looks good (mechanically of course) -- I could use some type of fork installation, will decide on that after I see the bucket configuration -- a post hole digger will be a must also -- those things I can buy after taking delivery.

I think I have answered most of the questions that are asked after a "new guy" makes his first post... just wondering if there is anything I should know about G&S or this particular model before my "trip" in two days... I think I am good to go.

BTW -- These pages on this website have offered a plethora of information to me on not only the Yanmar, but other brands also... they also gave some "dealers" (of new products) headaches when attempting to communicate with me on new tractor prices... Oh well, this area must be living in a time warp? -- Would much rather have the old 3110 and work on it...