Pallet Fork Question

[tomd999]

Hi,

I have a set of Horst Welding forks for my 2520. They weigh about 250 Lbs, have a good back stop and the forks are slide adjustable for width. They are rated for 1200Lbs which matches the 200cx loader well.

Tom

 

[Artesia Aggie]

Thanks for the input. I will definitely not be carrying hay bales high no matter what I settle on!

Steve, glad to hear your place is ok, just sorry for those that lost house etc.

 

[Deadman]

I have the everything attachments and can't complain, they work great and are light. I had the JD forks, and they were so heavy the 2520 was useless.

 

[Artesia Aggie]

Thanks all. Steve looked at the bale spear but ended up buying a carryall at TSC. I had to do some welding to make it i-match compatible but it cost about $150 total. Works great for the bales I have been buying.

I will probably get the forks at some point but the carryall works great.

 

[sldva00]

The only complaint I have with Everything Attachment forks are that when not carrying anything and driving on bumpy roads, the forks will move on you. I have to get off and adjust them once I'm about to pick up a load.